two fixtures on one switch sorted by

relevance

There will be no extra draw on the battery but the circuits will be safe because of the fuse.

.

Use a voltage detector to ensure that there is no power coming to the wall.

Ricardo Mitchell is the CEO of CN Coterie, a fully licensed and insured Lead EPA Environmental Protection Agency Certified construction company located in Manhattan, New York.

Would changing the DHCP settings on the AP help? Make sure you check the light bulb and appliance before continuing, as the problem may not be with the switch.

The 2nd light can be connected to any point on the switch leg the switch leg is from 3 to 4 and 5 to 8 The next best connection point would be to connect the 2nd light to the first light A black wire from 4 to 6 and a white wire from 5 to 7 Splicing into any other point along the switch leg is permitted as long as your connections are contained in an accessible junction box and the lengths of wire inside the box is 6 inches long.

If the end of the wire is frayed or nicked up, cut it off, strip another inch of insulation off, and use this end.

In essence, dual-homing the machine.

The bottom outlet is hot all the time.